MILLING
NPA 18/2018 INCH
FFQ4-12 Milling Family is Expanding
Highlights
Following its successful introduction in 2015 (NPA 55-2015) and
the consequent market demand, ISCAR is expanding the tool and
insert options of the FFQ4-12 Milling Family to include new tools
and insert geometries.
The FFQ4-12 tools carry square single-sided inserts with 4 cutting edges, designed for reducing cutting forces when used on low power machines or long overhang applications.
A new FFQ4 D5.0-10-1.50-12 shell mill cutter extends the diameter range of application options for roughing operations in the die & mold and aerospace industries, and in general engineering.
FFQ4 SOMT 125… Insert Features
- Single-sided square insert with 4 cutting edges
- Available with five cutting geometries for optimal machining of different materials:
FFQ4 SOMT 12516T for steel, ferritic and martensitic stainless steel, cast iron and hardened steel
FFQ4 SOMT 12516HP for austenitic stainless steel and high temperature alloys
FFQ4 SOMT 120516T20 for grey and nodular cast iron
FFQ4 SOMT 1205RM-T for interrupted cut and for machining near straight wall shoulders of steel, ferritic and martensitic stainless steel, cast iron and hardened steel
FFQ4 SOMT 1205RM-HP for interrupted cut and for machining near straight wall shoulders of austenitic stainless steel and high temperature alloys - The FFQ4 inserts are produced from ISCAR’s latest SUMOTEC carbide grades, ensuring high productivity
FFQ4 D…-12 Tool Features
- 9˚ cutting edge angle
- Positive axial rake angle
- Ramping down capability
- .122” radius for programming
- Fine pitch and coarse pitch cutter versions
- Internal coolant holes directed to each cutting edge
- Cutter body with a special protective polished coating for uninterrupted chip flow and protection from corrosion and wear
FFQ4 D-12
Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
• Radius for programming .122"
(1) Plunging width
(1) Plunging width
FFQ4 SOMT 1205
Square Single-Sided Inserts with 4 Cutting Edges for Fast Feed Milling
Square Single-Sided Inserts with 4 Cutting Edges for Fast Feed Milling
RM-HP- for interrupted cut and machining next to shoulders of austenitic stainless steel and high temperature alloys
• RM-T- for interrupted cut and machining next to shoulders of steel, ferritic and martensitic stainless steel, cast iron and hardened steel
• HP- for austenitic stainless steel and high temperature alloys
• T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel
• T20- for grey and nodular cast iron
• RM-T- for interrupted cut and machining next to shoulders of steel, ferritic and martensitic stainless steel, cast iron and hardened steel
• HP- for austenitic stainless steel and high temperature alloys
• T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel
• T20- for grey and nodular cast iron
Cutting Recommendations for FFQ4-12 Fast Feed Face Mills
** Quenched and tempered
For machining in unstable conditions, the recommended cutting data should be reduced by 20-30%.
The NPA18-inch-2018's pdf file: View (PDF) or Download (ZIP)