Page 13 - parting_4_productivity_3375101

Parting with Extra Stability and Higher Productivity

TWISTED 2-SIDED D120 D52
D82
DGAQ-JHP
Parting and Grooving Square OAH HF OAH HF
Blades for DO-GRIP Inserts CUTDIA CUTDIA

OAL CWN-CWX OAL CWN-CWX
WB WB Bar Max
Designation OAL OAH CWN (1) CWX (2) WB HF CUTDIA Inserts
DGAQ D52-2-2Z-JHP 50.00 50.0 1.90 2.50 1.72 43.5 SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A* 52.0 DG 2
DGAQ D52-3-2Z-JHP 50.00 50.0 3.00 3.18 2.50 43.5 SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A* 52.0 DG 3
DGAQ D52-4-2Z-JHP 50.00 50.0 4.00 4.00 3.20 43.5 SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A* 52.0 DG 4
DGAQ D82-3-2Z-JHP 61.00 64.4 3.00 3.18 2.50 58.0 SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A* 82.0 DG 3
DGAQ D82-4-2Z-JHP 61.00 64.4 4.00 4.00 3.20 58.0 SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A* 82.0 DG 4
DGAQ D82-5-2Z-JHP 61.00 64.4 5.00 5.00 4.00 58.0 SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A* 82.0 DG 5
DGAQ D120-4-4Z-JHP 90.50 90.5 4.00 4.00 3.20 84.0 SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A* 120.0 DG 4
DGAQ D120-5-4Z-JHP 90.50 90.5 5.00 5.00 4.00 84.0 SR M4X9-SEAL-JHP JHP COPPER SEAL 1/8" EDG 33A* 120.0 DG 5
• When using 2 and 3mm double-sided inserts, the depth of cut is limited up to 19mm. For larger depth, use a DGNM type single-ended insert.
* Optional, should be ordered separately
(1) Minimum cutting width
(2) Maximum cutting width

Flow Rate vs. Pressure
70 Bar 100 Bar 140 Bar
Designation Flow Rate (liters/min) Flow Rate (liters/min) Flow Rate (liters/min)
DGAQ D52-2-2Z-JHP 4-7 5-8 6-9
DGAQ D52/82-3-2Z-JHP
DGAQ D52/82/120-4-...-JHP 6-7 7-8 8-9
DGAQ D82/120-5-...-JHP

DGN/DGNM-C ±0.1
Double-Sided Parting Inserts for
Parting and Grooving Bars, Hard RE
Materials and Tough Applications INSL
CW
DGN DGNM

Recommended
Dimensions Tough 1 Hard Machining Data

IC830 IC1030 IC5400 IC1010 IC808 IC908 IC30N IC807 IC907 f groove
Designation CW CWTOL (3) RE RETOL (4) CDX INSL IC20 (mm/rev)
DGN 2002C 2.00 0.03 0.20 0.020 18.00 19.90 • • • • • • • 0.05-0.16
DGN 2202C 2.20 0.03 0.20 0.020 18.00 19.80 • • • • • • • • • 0.05-0.16
DGN 2502C 2.50 0.03 0.20 0.020 18.00 20.70 • • • 0.08-0.20
DGN 3102C 3.10 0.04 0.20 0.020 18.00 20.10 • • • • • • • • • • 0.10-0.25
DGNM 3202C (2) 3.18 0.04 0.20 0.020 - (5) 20.40 • 0.10-0.25
DGN 4003C 4.00 0.04 0.30 0.030 - 18.80 • • • • • • 0.10-0.30
(5)
DGN 4803C 4.80 0.04 0.30 0.030 - 19.90 0.12-0.35
(5)
DGN 5003C 5.00 0.04 0.30 0.030 - 19.10 • • • • • 0.12-0.35
(5)
• Feed values for grade IC20 should be decreased by 50% • For full range see CMS Catalog
Single-ended insert
(2)
Cutting width tolerance (+/-)
(3)
Corner radius tolerance (+/-)
(4)
No depth limit
(5)

13