Page 5 - HOLE MAKING CATALOG p311-382
P. 5
RM-BN-H7SA V IC08
Quick Change Straight Flute V IC908
Interchangeable Solid Carbide 0.5
Reaming Heads for High Speed REAMERS
Reaming of Blind Holes SSC DC 45°
LPR Tough 1 Hard
Dimensions
Designation SSC(2) DC LPR NOF(3)
9.50 6 • •
RM-BN5-11.501-H7SA BN5 11.501 9.50 6 • •
RM-BN5-12.000-H7SA BN5 12.000 9.50 6 • •
BN5 13.000 9.50 6 • •
RM-BN5-13.000-H7SA 13.500 9.50 6 • •
13.501 9.50 6 • •
RM-BN5-13.500-H7SA BN5 14.000 9.50 6 • •
RM-BN6-13.501-H7SA BN6 15.000 9.50 6 • •
RM-BN6-14.000-H7SA BN6 16.000 10.70 6 • •
16.001 10.70 6 • •
RM-BN6-15.000-H7SA BN6 17.000 10.70 6 • •
RM-BN6-16.000-H7SA BN6 18.000 10.70 6 • •
RM-BN7-16.001-H7SA BN7 19.000 10.70 6 • •
RM-BN7-17.000-H7SA BN7 20.000 12.90 8 • •
RM-BN7-18.000-H7SA BN7 20.001 12.90 8 • •
21.000 12.90 8 • •
RM-BN7-19.000-H7SA BN7 22.000 •
RM-BN7-20.000-H7SA BN7 23.000 •
RM-BN8-20.001-H7SA BN8 24.000 •
RM-BN8-21.000-H7SA BN8 25.000 •
RM-BN8-22.000-H7SA BN8 26.000 •
27.000 •
RM-BN8-23.000-H7SA BN8 28.000 12.90 8 •
BN8 29.000 12.90 8 • •
RM-BN8-24.000-H7SA BN8 30.000 12.90 8 • •
BN9 31.000 12.90 8 • •
RM-BN8-25.000-H7SA BN9 32.000 12.90 8
BN9
RM-BN9-26.000-H7SA BN9 12.90 8
RM-BN9-27.000-H7SA (1) BN9
RM-BN9-28.000-H7SA (1) BN9 12.90 8
RM-BN9-29.000-H7SA (1) BN9
RM-BN9-30.000-H7SA (1) 12.90 8
RM-BN9-31.000-H7SA (1)
RM-BN9-32.000-H7SA (1) 12.90 8
12.90 8
• For user guide, see pages 316-321
(1) The uncoated fine grain IC08 is available on request
(2) Seat size code
(3) Number of flutes
Complementary Grades (on request): ID5 (PCD) recommended for high speed
reaming of aluminum (special cases).
IC30N cermet tipped, recommended for reaming the following RN01 (DLC coating) recommended for reaming the
materials: non-alloyed (mild) steel,low alloyed steel (<5% of alloying following materials: aluminum alloys (cast, wrought, etc.),
elements), free cutting steel, tempered steel (tensile strength brass, bronze and other nonferrous materials.
<1100 N/mm2) and nodular iron (GGG40, GGG60, etc.)
315