TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X

MILLING
NPA 20/2017 INCH


MILLING

F90SD-12 in the Popular HELIQUAD Line of Indexable Milling Tools is Being Upgraded

Highlights

ISCAR is upgrading and expanding the HELIQUAD line with new milling cutters that carry S/QDM# 1205… single-sided square inserts.


ISCAR is introducing new F90SD-12 face milling cutters that feature an advanced design with respect to the existing F90SD-12 cutters.

The improved design considerably improves performance when compared to the current tools.

The new face mills are available in a diameter range of 2.000 to 5.000”, in coarse and fine pitch configurations.

Tool Features
  • Greater durability and simpler structure, without the need for extra accessories such as seats, bushings and their fasteners
  • Coolant channels with exits directed to the cutting edges
  • Upgraded Torx Plus (IP) insert clamping screw for more rigid clamping
  • Increased body hardness combined with HARD TOUCH coating for improved chip flow and wear resistance
  • 5.000”diameter tools are shorter than the previous version, providing higher stability and easy cutting




The new HELIQUAD-12 inserts are produced from ISCAR’s latest SUMO TEC carbide grades, significantly increasing productivity.

Current Insert Types

SDMT 1205PDN-RM-M

Inserts with 4 reinforced cutting edges, designed for heavy roughing applications under unfavorable conditions

SDMT 1205PDR-HQ-M

General-use inserts with 4 helical cutting edges for 90° shoulder milling

SDMR 1205PDR-HQ-M

Super positive square inserts for machining stainless steel, high temperature alloys and several aluminum grades

QDMT 1205PDN-RM

General-use inserts with 4 neutral cutting edges providing 4 right- or left-hand cutting edges

QDMT 1205...PDTN-M

Positive square general-use inserts with 4 neutral cutting edges providing 4 right- or left-hand cutting edges

QDCT 1205…PDN -F

Peripherally ground cutting edges for higher precision to be used only on face mills and extended flute cutters


Tool Applications
  • Machining main engineering materials such as alloyed steel, cast iron, stainless steel and difficult-to-cut HTSA
  • Wide range of shoulder and face milling operations
  • General engineering applications


Note: The new F90SD…12 cutters will gradually replace the current equivalent sizes:

New items
Item Description
Old items
Item Description
 


ISCAR will continue to supply the old cutters until stock is depleted, and then orders will be switched automatically to their new tool alternatives.

HELIQUAD-12 Inserts Phase Out
Following very low consumption of the HELIQUAD-12 inserts in grades IC950, IC4010, IC4050 and IC50M. ISCAR is phasing out the following inserts:

5603687   SDMT 1205PDN-RM-M IC950
5604215   SDMT 1205PDR-HQ-M IC4010
5603671   SDMT 1205PDR-HQ-M IC4050
5693883   SDMT 1205PDR-HQ-M IC50M
5603673   SDMT 1205PDR-HQ-M IC950
5603742   QDMT 1205PDTN-M IC950
5604488   QDMT 120532PDTN-M IC950


ISCAR will continue to provide the above inserts until stock is depleted.

F90SD-12
90° Face Mills Carrying S/QDM# 12... Inserts
(1) Number of inserts
Note: Parameter designations according to ISO 13399 Standard




SDMT-PDN-RM
General Use Inserts with Four Helical Cutting Edges for 90° Shoulder Milling



SDMT-PDR-HQ
General Use Inserts with Four Helical Cutting Edges for 90° Shoulder Milling



SDMR-HQ
Super Positive Square Insert for Aluminum,
Stainless Steel and High Temperature Alloys



QDMT 1205PDN-RM
QUAD2000 general use insert, has 4 right-hand or 4 left-hand cutting edges.



QDMT 1205..PDTN-M
Inserts with 4 Right- or Left-Hand Cutting Edges for General Use
• Inserts with corner radii larger than .0315” should be used only on the face of the SDK cutter



QDCT-PDN
Precision Ground Inserts with 4 Right- or Left-Hand Cutting Edges for General Use
• Inserts with corner radii larger than .0315” should be used only on the face of the SDK cutter



Privacy Statement