CAMFIX MAXIN, VDI and Sleeve-Type Tool Blocks for WHISPERLINE Boring Bars

Highlights

CAMFIX for WHISPERLINE
Following the market demand growth for WHISPERLINE boring bars with CAMFIX clamping, ISCAR is now offering attractive clamping solutions based on existing standard items.

WHISPERLINE boring bars can be clamped on existing CAMFIX power chucks without affecting performance.
The combination of CAMFIX power chucks with the WHISPERLINE bars is ideal for stable machining in long overhang applications.

• The standard guideline when clamping a WHISPERLINE bar in a split sleeve is to clamp 4XD of the shank length to obtain satisfactory results
• Extremely high gripping force of the CAMFIX power chuck ensures good performance also with 2.5XD clamping
• Due to hole depth limitations in some of the standard CAMFIX holders, the WHISPERLINE bar might have an overhang of over 10XD. In such cases, we firstly recommend trying to work as is with the existing overhang. In cases where performance is unsatisfactory, shorten the bar to be within the 10XD limit

CAMFIX MAXIN	Collets for MAXIN Power Chucks
	Ø16	Ø20	Ø25	Ø32
C5 MAXIN 20x100	SC 20 SPR 16	Direct	X	X
C6 MAXIN 32x115	SC 32 SPR 16	SC 32 SPR 20	SC 32 SPR 25	Direct
C8 MAXIN 32x115	SC 32 SPR 16	SC 32 SPR 20	SC 32 SPR 25	Direct

VDI for WHISPERLINE
WHISPERLINE boring bars can also be clamped on new VDI holders while fully maintaining their performance.
Below is a table showing the available combinations:

VDI	Bore Diameter
	Ø16	Ø20	Ø25	Ø32	Ø40	Ø50	Ø60
VDI30	✔	✔	✔	✔	✗	✗	✗
VDI40	✔	✔	✔	✔	✔	✗	✗
VDI50	✔	✔	✔	✔	✔	✔	✗
VDI60	✗	✗	✔	✔	✔	✗	✔

Description Key:




TOOL BLOCKS for WHISPERLINE
Sleeve-Type Blocks for DMG Machines
ISCAR offers also tool blocks with reduction sleeves (bushings). The blocks are made for the following machine types:

T-Slot 25 mm for DMG MORI CTX450ECO & CTX510ECO with VDI40

T-Slot 32 mm for DMG MORI CTX620, CTX650ECO & BETA2000 with VDI50

Description Key:



Reduction Sleeves (bushings) for Tool Blocks and VDI Holders
The reduction sleeves (bushings) are made for tool blocks as well as for the VDI tools.
It is critical to clamp WHISPERLINE boring bars in split sleeves in order to ensure effective chatter reduction.

Description Key:



Why WHISPERLINE boring bars should be fully clamped
The WHISPERLINE boring bars are built with an auxiliary mass damper immersed in absorbent oil.

To make sure the boring bar works, it must be induced by vibrations, which means that vibrations need to be transferred to the boring bar itself. This is possible only with very rigid clamping on the machine side and the clamping device.
A single point screw provides partial clamping efficiency which cannot ensure that the vibration energy is fully transferred to the boring bar.

Clamping of WHISPERLINE anti-vibration boring bar




C#-MAXIN
MAXIN Power Chucks with CAMFIX (ISO 26623-1 standard) Exchangeable Shanks

• Can be used for carbide and HSS tools
• The adjustment screw has an internal coolant hole
• Use of DCONWS diameter tools provides best performance, as collets reduce the gripping force.

(1) Minimum diameter by using a reduction collet
(2) Maximum diameter by using a reduction collet
(3) Max. diameter without a collet

* Optional, should be ordered separately



VDI AV-JHP
VDI Holders For Anti-Vibration Tools



BLKT AV-JHP
BLKT Sleeve Type Blocks for DMG Machines

AV FLEX-SLEEVE
Reduction Sleeves for Tool Blocks and VDI Holders



The NPA33-2020's pdf file: View (PDF) or Download (ZIP)