Page 22 - HOLE MAKING CATALOG p149-184

SOLID CARBIDE DRILLSSCD-ACP-CS (20xD) L5 OAL LS
IC908Solid Carbide Drills withPLLCFDCh8
Coolant Holes for Automotive LU
Crankshaft Applications, DCONMSh6
Drilling Depth 20-22xD Dimensions
140º

MQL

Designation DC LU LCF OAL DCONMS PL LS L5(1)
40.00 •
SCD 050-103-060ACP-CS 5.00 103.0 118.0 156.00 6.00 0.910 38.0 40.00 •

SCD 060-120-060ACP-CS 6.00 120.0 140.0 178.00 6.00 1.090 38.0

• For user guide, see pages 175-184

(1) Up to 50% of this length may be used to regrind

Recommended Drilling Procedure 1
for Deep Hole Drilling (20XD) 2
3
1 Drill a pilot hole 1-2*D deep with a short drill. The pilot 4
drill should be 0.03-0.05 mm larger than the long drill
and its point angle should also be larger (over 140°).

2 Enter the pre-hole using low speed and
feed, until it engages the material.

3 Increase cutting speed and feed to recommended
conditions – no pecking is required!

4 After having reached the required depth, reduce speed
by more than 50% while retracting from the hole.

Recommended Machining Conditions for Solid Carbide 20xD Drills

Drill Dia. (mm) Carbon Steel Alloy Steel Stainless Steel Cast Iron Ductile Cast Iron
V(m/min) f(mm/rev)
(30 HRc) (45 HRc) (GG25) (GG45)
V(m/min) f(mm/rev) V(m/min) f(mm/rev) V(m/min) f(mm/rev) V(m/min) f(mm/rev)

5 60-120 0.12-0.25 50-100 0.1-0.20 30-60 0.08-0.15 60-120 0.15-0.30 40-80 0.15-0.25

6 60-120 0.14-0.25 50-100 0.14-0.25 30-60 0.10-0.18 60-120 0.14-0.25 40-80 0.14-0.25

7-8 60-120 0.16-0.30 50-100 0.16-0.30 30-60 0.10-0.20 60-120 0.16-0.30 40-80 0.16-0.30

9-10 60-120 0.16-0.30 50-100 0.10-0.20 30-60 0.08-0.115 60-120 0.20-0.35 40-80 0.20-0.35

170 ISCAR