Page 21 - ISCAR FACE GROOVING LINES

OAL IC908

PICCO-016/020-N DAXN CDX FACE GROOVE-TURN
(Face Grooving) DCONMS
Inserts with Internal Coolant a CW PSI Max
Channel for Deep Face Grooving RE.008
Recommended
I LU Machining Data

NC H
Dimensions

f face-groove

Designation DAXN(1) CW LU CDX DCONMS a OAL (IPR)

PICCO R016.0300-10N .63 .118 .354 .354 .315 .217 1.260 • .0004-.0020
PICCO R016.0300-20N .63 .118 .748 .748 .315 .217 1.614 • .0004-.0020
PICCO R016.0400-20N .63 .157 .748 .748 .315 .236 1.614 • .0004-.0020
PICCO R020.0300-25N .79 .118 .945 .945 .315 .217 1.811 • .0004-.0020
PICCO R020.0300-30N .79 .118 1.142 1.142 .315 .217 2.008 • .0004-.0016
PICCO R020.0300-40N .79 .118 1.535 1.535 .315 .217 2.402 • .0004-.0016
PICCO R020.0400-25N .79 .157 .945 .945 .315 .236 1.811 • .0004-.0024
PICCO R020.0400-30N .79 .157 1.142 1.142 .315 .236 2.008 • .0004-.0024
PICCO R020.0400-40N .79 .157 1.535 1.535 .315 .236 2.402 • .0004-.0020
PICCO R020.0500-25N .79 .197 .945 .945 .315 .256 1.811 • .0008-.0024
PICCO R020.0500-30N .79 .197 1.142 1.142 .315 .256 2.008 • .0008-.0024
PICCO R020.0500-35N .79 .197 1.339 1.339 .315 .256 2.205 • .0008-.0020
PICCO R020.0500-40N .79 .197 1.535 1.535 .315 .256 2.402 • .0008-.0020

• All inserts have two coolant holes which may be used with coolant pressure up to 1450 PSI • Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only
• For detailed cutting data, see pages 162-164
(1) Minimum axial grooving diameter

19