Page 18 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN PICCO-620-N OAL
(Face Grooving Along Shaft) DAXN
Inserts with Internal Coolant
Channel for Grooving Along a CDX DCONMS
Shaft Dmin 6 mm CW LU
C
ME TR I
Dimensions
Recommended
Designation DAXN(1) CW CDX DCONMS a LU OAL IC908 Machining Data

PICCO R 620.1006-20N 6.0 1.00 2.00 6.05 5.20 19.0 41.00 f face-groove
41.00 (mm/rev)
PICCO R 620.1506-20N 6.0 1.50 3.00 6.05 5.20 19.0 41.00
41.00 • 0.01-0.04
PICCO R 620.2006-20N 6.0 2.00 4.00 6.05 5.20 19.0 41.00 • 0.01-0.05
• 0.02-0.06
PICCO R 620.2506-20N 6.0 2.50 5.00 6.05 5.20 19.0 • 0.02-0.06
• 0.02-0.06
PICCO R 620.3006-20N 6.0 3.00 6.00 6.05 5.20 19.0

• Only right-hand inserts are available as standard, left-hand inserts on request • All carbide inserts are with sharp corners
• Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only • For detailed cutting data,see pages 162-164
(1) Minimum axial grooving diameter

PICCO-620-N OAL
(Face Grooving Along Shaft)
Inserts with Internal Coolant a DAXN
Channel for Grooving CW DCONMS
Along Shaft Dmin .236"
I CDX
LU
Recommended
NCH Machining Data
Dimensions
f face-groove
Designation DAXN(1) CW CDX DCONMS a LU OAL IC908 (IPR)

PICCO R 620.1006-20N .24 .039 .079 .238 .205 .748 1.614 • .0004-.0016
1.614 • .0004-.0020
PICCO R 620.1506-20N .24 .059 .118 .238 .205 .748 1.614 • .0008-.0024
1.614 • .0008-.0024
PICCO R 620.2006-20N .24 .079 .157 .238 .205 .748 1.614 • .0008-.0024

PICCO R 620.2506-20N .24 .098 .197 .238 .205 .748

PICCO R 620.3006-20N .24 .118 .236 .238 .205 .748

• Only right-hand inserts are available as standard, left-hand inserts on request • All carbide inserts are with sharp corners
• Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only • For detailed cutting data,see pages 162-164
(1) Minimum axial grooving diameter

16 ISCAR