Page 20 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN OAL
IC908
PICCO-016/020-N DAXN CDX
(Face Grooving) DCONMS
Inserts with Internal Coolant a CW Bar Max
Channel for Deep Face Grooving RE0.2
Recommended
ME LU I C Machining Data

TR
Dimensions

f face-groove

Designation DAXN(1) CW LU CDX DCONMS a OAL (mm/rev)

PICCO R016.0300-10N 16.0 3.00 9.00 9.00 8.00 5.50 32.00 • 0.01-0.05
8.00 5.50 41.00 • 0.01-0.05
PICCO R016.0300-20N 16.0 3.00 19.00 19.00 8.00 6.00 41.00 • 0.01-0.05
8.00 5.50 46.00 • 0.01-0.05
PICCO R016.0400-20N 16.0 4.00 19.00 19.00 8.00 5.50 51.00 • 0.01-0.04
8.00 5.50 61.00 • 0.01-0.04
PICCO R020.0300-25N 20.0 3.00 24.00 24.00 8.00 6.00 46.00 • 0.01-0.06
8.00 6.00 51.00 • 0.01-0.06
PICCO R020.0300-30N 20.0 3.00 29.00 29.00 8.00 6.00 61.00 • 0.01-0.05
8.00 6.50 46.00 • 0.02-0.06
PICCO R020.0300-40N 20.0 3.00 39.00 39.00 8.00 6.50 51.00 • 0.02-0.06
8.00 6.50 56.00 • 0.02-0.05
PICCO R020.0400-25N 20.0 4.00 24.00 24.00 8.00 6.50 61.00 • 0.02-0.05

PICCO R020.0400-30N 20.0 4.00 29.00 29.00

PICCO R020.0400-40N 20.0 4.00 39.00 39.00

PICCO R020.0500-25N 20.0 5.00 24.00 24.00

PICCO R020.0500-30N 20.0 5.00 29.00 29.00

PICCO R020.0500-35N 20.0 5.00 34.00 34.00

PICCO R020.0500-40N 20.0 5.00 39.00 39.00

• All inserts have two coolant holes which may be used with coolant pressure up to 100 bars • Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only
• For detailed cutting data, see pages 162-164
(1) Minimum axial grooving diameter

18 ISCAR