Page 16 - TURNING CATALOG p255-458
P. 16
GROOVE-TURN INSL (Ref.)
7°
IC830
IC8250
IC08
IC808
IC908
IC418
IC5010
IC806
IC807
IC804
GRIP (full radius) ±0.1
Utility Double-Ended Full
Radius Inserts for External, CW
Internal and Face Machining RE BW
Dimensions Tough 1 Hard No depth penetration limit
Recommended Machining Data
f face- f face-
ap f turn f groove groove turn
Designation CW RE CWTOL(1) RETOL(2) INSL BW (mm) (mm/rev) (mm/rev) (mm/rev) (mm/rev)
0.050 15.80 2.10 • • • • • • • • • • 0.00-1.50 0.18-0.26 0.07-0.13 0.08-0.20 0.10-0.20
GRIP 3015Y 3.00 1.50 0.05 • • • 0.00-1.50 0.19-0.28 0.07-0.13 0.08-0.20 0.10-0.20
GRIP 318-159Y 3.18 1.59 0.05 0.050 15.80 2.30
0.050 19.00 2.80 • • • • • • • • • • 0.00-2.00 0.20-0.34 0.09-0.17 0.10-0.24 0.15-0.30
GRIP 4020Y 4.00 2.00 0.05 ••• •
GRIP 476-238Y 4.76 2.38 0.05 0.050 19.00 3.20 0.00-2.30 0.21-0.40 0.10-0.20 0.10-0.24 0.15-0.30
0.050 19.00 3.40 • • ••• • • • 0.00-2.50 0.23-0.42 0.11-0.21 0.12-0.24 0.15-0.35
GRIP 5025Y 5.00 2.50 0.05 0.050 19.00 4.20 • • • • • • • • •
GRIP 6030Y 6.00 3.00 0.05 0.00-3.00 0.24-0.50 0.13-0.25 0.12-0.28 0.15-0.40
• • • 0.00-3.10 0.25-0.53 0.14-0.27 0.12-0.28 0.15-0.40
GRIP 635-318Y 6.35 3.18 0.05 0.050 19.00 4.00
• For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: C#-HELIR/L (265) • C#-HFIR/L-MC (573) • CR HFIR-M (575) • D/HGAD RE/LE-JHP (499) • DGAD/HGAD (479)
• DGFH (268) • DGFH-JHP (269) • DGFS (469) • DGTR/L (476) • HELIIR/L (355) • HELIR/L (266) • HFAER/L-4 (565) • HFAER/L-5T, 6T (566)
• HFAIR/L-4 (572) • HFAIR/L-DG (573) • HFFR/L-T (564) • HFHR/L-4T (559) • HFHR/L-5T (560) • HFHR/L-6T (561) • HFIR/L-MC (574)
• HFPAD-3 (562) • HFPAD-4 (563) • HFPAD-5 (563) • HFPAD-6 (564) • HFPAD-JHP (562) • HGAER/L-3 (565) • HGAIR/L-3 (568) • HGFH (268)
• HGHR/L-3 (558) • HGPAD (267) • HGPAD-JHP (267) • IM-HFIR-MC (574)
TGDR/L LH OAL H
External Holders for Turning, HF HBH B
Grooving and Profiling
WF CDX
CWN-CWX Right-hand shown
Designation CWN(1) CWX(2) CDX(3) H HF B OAL LH WF HBH Insert
TGDR/L 1616-3M 3.00 3.00 7.50 16.0 16.0 16.0 100.00 30.5 14.80 6.0 TGMF 3 SR M5X12 DIN912 HW 4.0(a)
TGDR/L 2020-3M TGMF 3 SR M5X12 DIN912 HW 4.0(a)
3.00 3.00 7.50 20.0 20.0 20.0 125.00 30.5 18.70 - TGMF 3 SR M5X12 DIN912 HW 4.0(a)
TGDR/L 2525-3M
3.00 3.00 7.50 25.0 25.0 25.0 140.00 30.5 23.70 -
TGDR/L 1616-4M 4.00 5.00 9.00 16.0 16.0 16.0 100.00 32.2 14.20 6.0 TGMF 4/TGMF 5 SR M5X12 DIN912 HW 4.0(a)
TGDR/L 2020-4M
TGDR/L 2525-4M 4.00 5.00 9.00 20.0 20.0 20.0 125.00 32.2 18.20 6.0 TGMF 4/TGMF 5 SR M5X12 DIN912 HW 4.0(a)
TGDR/L 2525-5M
TGDR/L 3232-5M 4.00 5.00 15.50 25.0 25.0 25.0 140.00 34.0 23.20 - TGMF 4/TGMF 5 SR M5X12 DIN912 HW 4.0(a)
5.00 5.00 18.00 25.0 25.0 25.0 140.00 37.0 22.70 - TGMF 5 SR M5X12 DIN912 HW 4.0(a)
5.00 5.00 22.00 32.0 32.0 32.0 150.00 45.0 29.80 - TGMF 5 SR M6X12DIN912 HW 5.0(a)
TGDR/L 2525-6M 6.00 6.35 22.00 25.0 25.0 25.0 150.00 43.0 22.50 - TGMF 6 SR M6X16 DIN912 HW 5.0(a)
TGDR/L 3232-6M 6.00 6.35 22.00 32.0 32.0 32.0 150.00 43.0 29.50 - TGMF 6 SR M6X16 DIN912 HW 5.0(a)
• For user guide, see pages 419-428, 432-436
(1) Minimum cutting width
(2) Maximum cutting width
(3) Grooving depth is limited by the insert
(a) For optional key with limited tightening torque see page 427
For inserts, see pages: TGMA (272) • TGMF (full radius) (272) • TGMF/P (272)
HOLDER: MAHPR WF(assembly) OAH HF
TGPAD WF(holder) OHN OAL WF (adapter)
Adapters Carrying TGMF / CDX
TGMP Groove-Turn Inserts
HOLDER: MAHL WB_2 WB CWN-CWX
Left-hand shown • WF(assembly)=WF(holder)+WF(adapter)
Designation CWN(1) CWX(2) CDX(3) WF(4) WB WB_2 OHN(5) OAL HF OAH
TGPAD 3R/L-T9 3.00 3.00 9.00 4.00 2.40 5.2 12.7 37.20 24.0 30.0
TGPAD 4R/L-T16 4.00 5.00 16.00 3.50 3.40 5.2 17.2 41.70 24.0 30.0
TGPAD 5R/L-T16 5.00 5.00 16.00 3.00 4.40 5.2 17.2 41.70 24.0 30.0
TGPAD 6R/L-T22 6.00 6.35 22.00 3.50 5.00 6.0 23.2 47.10 24.0 32.0
• For user guide, see pages 419-428, 432-436
(1) Minimum cutting width
(2) Maximum cutting width
(3) Grooving depth is limited by the insert
(4) WF(adapter)
(5) Minimum overhang
For inserts, see pages: TGMA (272) • TGMF (full radius) (272) • TGMF/P (272)
270 ISCAR
